per l'adc 24 bit per acquisire
ADC24 – 16 Channels ADC with 24 Bit
The ADC24 module offers ultra-high precision, high-speed measurement with 24-bit resolution (1/268 million granularity).
Ideal for connecting directly to sensitive sensors like geophones and load cells via a Theremino Master and the HAL app.
SKU: ADC24
Category: Controller & Adapters boardsTags:
ADC 24 bit, Geophone, load cell, ultra accuracy analog measurement, ultra accuracy temperature measurement
Description
🔬 ADC24: Ultra-High Precision 24-Bit ADC Module
The ADC24 module opens the door to a thousand possible applications, allowing you to enter the world of multiple, high-speed, and high-precision measurements at a minimal cost. This module utilizes the cutting-edge Analog Digital Converter AD7124-8 chip by ANALOG DEVICES.
Key Technical Specifications and Power
Extreme Resolution: Features 8 or 15 (depending on configuration) 24-bit analog inputs.
24-Bit Precision: A 24-bit resolution means a staggering granularity of 1 / 268,435,456 (224). For example, you can monitor a 1-volt excursion with an accuracy of one part in over 260 million.
Direct Sensor Connection: Easily connects directly to sensitive sensors like geophones, load cells, accelerometers, gyroscopes, and temperature sensors.
Revolutionize Your Measurements
The Theremino ADC24 provides the concrete possibility of tackling thousands of applications that were previously economically or technically infeasible. By simply connecting a few wires, you eliminate the need for unstable, hard-to-build, and complex preamplifiers.
Scientific Accuracy: Build excellent data loggers with features comparable to commercial units costing thousands of Euros by connecting this device to a Theremino Master and using the Theremino Data Scope software.
Versatile Applications: Measure voltages and currents with resolution a thousand times greater than a good standard tester. Ideal for analytical scales, magnetometers, microbarometers, and precision datalogging.
System Requirements and Safety
Operation Requirements
For the ADC24 to function, the following are required:
HAL Application: Version 6.6 (or later), which you can download from the official link below.
Theremino Master Module: Must be running firmware version 5.0 (or later).
Security Considerations
The maximum voltage applied to the inputs ranges from 0V to 3.3V positive. To create a datalogger capable of measuring and withstanding higher voltages, you must add two resistors per input.
Essential Resources and Documentation
To explore the full functionality and connect your sensors, refer to the official documentation.
Resource Description Useful LinkHAL Application Download The application required to communicate with the Master module and ADC24.
Master Firmware The necessary firmware upgrade for the Master module (V5.0 or later).
ADC24 Guide (ENG) Complete instructions with pictures and connection examples.
ADC24 Guide (ITA) Istruzioni complete con immagini ed esempi di collegamento.
Theremino Master Dil V5
The MasterV5 is the central controller of the Theremino System, featuring 12 configurable pins and the PIC24 chip. It communicates via USB HID at 480 Mbit/s and is managed entirely by the HAL software for real-time I/O control and expandability (e.g., with ADC24).
SKU: Master_V5
Category: Controller & Adapters boards
Description
🔌 MasterV5 (DIL): The Central Controller of the Theremino System
The MasterV5 is the foundational component—the MASTER—of the entire Theremino System. Designed around the powerful Microchip PIC24 family, this module manages all communication and I/O functions, acting as the bridge between your sensors/actuators and the high-level PC software.
This version (V5) is now fully implemented with 12 pins (Pins 1 through 12) and adheres to the standard 2.54 mm grid spacing, ensuring maximum compatibility with other prototyping systems.
Key Features and Connectivity
High-Speed HID Communication: Connects to the PC via a single USB cable, which also provides power. It communicates using the HID protocol at the maximum speed of 480 Mbit/s (USB 2.0 standard) for continuous, real-time data exchange.
Plug-and-Play on Windows: The Master is automatically recognized by the Windows 10 operating system without the need for complex driver installations.
Central HAL Management: The Master is brought to life by the HAL (Hardware Abstraction Layer) software. The HAL enables continuous communication and allows you to configure the functions of all 12 pins (e.g., as DigOut, Servo, ADC, etc.).
Expandability: With the latest firmware version, the Master can be connected to advanced modules like the ADC24 (24-bit Analog-to-Digital Converter), significantly expanding its measurement precision.
Product Details
The Master DIL V5 is sold fully assembled with the latest firmware pre-loaded, ready for immediate use. It is shipped in an anti-static bag with protective covers for the pins.
Essential Resources and Documentation
The Master requires the HAL software to operate and can be connected to many other modules and applications in the Theremino ecosystem.
Resource Description Useful LinkHAL Application Download The essential software for configuration, pin mapping, and continuous communication with the Master.
Official Website The main resource for detailed information, schematics, and projects related to the Master. www.theremino.org
Master Firmware Necessary firmware for the Master module (pre-loaded on the device).
Nessun commento:
Posta un commento